Home

Install WIM is too large for the destination file system

How to Solve Install

Make usb bootable using cmd : https://youtu.be/zNpvMNGZaCE(If you have install.esd just replace install.wim with install.esd infirst command as well asinstal.. Symptoms Microsoft ISO files for Windows 10 Volume License and maybe others as well are bigger than 4GB in total but also contain an install.wim with a size of more than 4 GB. This does not allow creating for example an USB stick with FAT32 file system and would require use of NTFS instead I tried to creating windows 7 bootable, then this message show: The file is too large for the destination file system. I dont know why it happened as there are tons of free space on the disk. And last thing my Flash drive format is NTFS and the application what Im using is WindowsImageTool. Im cr.. The Bottom Line Once you understand the file is too large for the destination file system is caused by the FAT32 file system, the solution is specific: change the file system The file is too large for the destination file system error is caused due to the FAT32 limitations. If you are well aware of various file systems, then you must have a little idea of their limitations. A file system is a method or structure used by operating systems for identifying and organizing files on the disk

It will be able to store large files. Before proceeding, backup any important data from you flash drive. The procedure will erase all files and folders from it. The steps below assume that you already have a Windows distro, and you are able to mount it in order to copy its files. To Create Bootable USB For Windows 10 Install.wim Larger Than 4GB The reason for the error is simple: The Windows Imaging format (WIM) file in that download, which contains the compressed files that the Windows Setup program uses for installing the new version,.. The file install.wim is too large for the destination file system. Size 4.29 GB. The virtual drive shows the following folders and files. boot (file folder) efi (file folder) sources (file folder) support (file folder) autorun (setup information) bootmgr (file) bootmgr.eft (EFI file) setup (application file Why File Is too Large for Destination File System. Why The file system is too large for the destination file system? To answer this question, we need some basic knowledge about the file systems in Windows at first. 1. What is file system? File system is the way and structure that operating system used to identify and organize the files on the. The file install.wim is too large for the destination file system

C:\sources\install.swm is the destination name and the location for the split.swm files. The first split.swm file is named install.swm file. The file names for the next files include numbers, for example, install2.swm file, install3.swm file, and so on. 4700 is the maximum size in MB for each of the split.swm files to be created Thus, one can indeed install Windows 10 from a custom WIM image larger than 4 GB, which is the the maximum file size on FAT32 media. But, unfortunately, there are still a number of computers where BIOS / UEFI lacks proper drivers. That's the real reason why they can only boot from FAT32 The install.wim image file is slightly larger than 4GB - making it too large for the FAT32 file system. Because I want to take advantage of UEFI, I need to have my USB drive formatted with FAT32. Whereas FAT32 support is required by the UEFI standard, NTFS or exFAT support is not. This means that I am currently unable to create a UEFI. The FAT32 file system can only store files that are less than 4GB. This may not be a problem for regular users. As of writing this, the Windows 10 default install.wim file is just barely under 4GB. However, if you are creating a custom image file with custom software and settings, that install.wim file can be massive. In those. ** In this method all the data in the drive will be lost to prevent that an Alternative video is also available : File is too large SOLVED- No data loss [N..

Steps to solve the file is too large for destination file system. These directions don't work to solve this problem because I cannot right click on command prompt . I don't see how to do that following the cli ck System Tools step A friend wanted to know how I made it since the install.wim is > 4GB since about 1709 I believe. Why the limit? The 4 GB barrier is a hard limit of FAT32: the file system uses a 32-bit field to store the file size in bytes, and 2^32 bytes = 4 GB (actually, the real limit is 4 GB minus one byte, or 4,294,967,295 bytes, because you can have files. Symptoms. Microsoft ISO files for Windows 10 Volume License and maybe others as well are bigger than 4GB in total but also contain an install.wim with a size of more than 4 GB. This does not allow creating for example an USB stick with FAT32 file system and would require use of NTFS instead. If you want to boot under UEFI you might fail, as not. The install.wim file (Windows Image File) is a compressed file which contains a set of many files and associated file system metadata and is included in any Windows installation Media under the sources folder (sources\install.wim). Sometimes when Windows 10 or 8 crashes, due to corrupted system files or for any other reason, there is a need to repair the Windows file system, by using the.

How to Copy Large Files to FAT32 with or without Converting Fix The File is too Large for the Destination File System My Kingston USB drive has over 14GB free space, but I cannot copy an 8GB iso file to the USB drive. My Windows 10 says that The file is too large for the destination file system This doesn't help my problem. I'm copying a 127KB file to a different folder, on the same drive, with currently has 478GB free. My only guess so far is that it's really a file path issue, that the file path and file name combined, is too many characters long, or there's an issue because I've created another drive reference to the same driver as a network path - so that I can refer.

The file install.wim is too large for the destination file system 4/9/2020. Back to List. Tags. Windows The file install.wim is too large for the destination file system. Solution. The file is too large for FAT32. The solution is to format the USB drive as NTFS. About Sean Nelso Cannot transfer files larger than 4GB to FAT32 USB flash drive or SD card because the file is too large for the destination file system? To be able to transfer, copy or move files bigger than 4GB, you must learn the four ways of how to change FAT32 to the other supported files system, which is either exFAT or NTFS, with or without formatting So I did a Mount of the ISO and then copied the files to a folder, which will work for the update I need to do this time. But I will need a bootable copy at sometime in the future. So I thought it has a autorun.inf file maybe it will work just coping the files to the USB. The drive is 16GB the update files total 5.59GB, should be plenty of room

C:\images\install.swm is the destination name and the location for the split .wim files. 4000 is the maximum size in MB for each of the split .wim files to be created. In this example, the /split option creates an install.swm file, an install2.swm file, an install3.swm file, and so on, in the C:\Images directory. Copy the files to the WinPE key The wim is too large now. I have used Rufus to copy the image to a usb drive, but that has issues with secure boot. My solution was to rebuild the wim with DISM and use the option to split the wim at 4Gb. That'll work for sure By the way, unless you are replacing the install.wim in the source directory of your OS Upgrade package each month, the Servicing option in Configuration Manager will end up stacking CUs since it will start from the previously serviced WIM (oh - and it will want to patch multiple indexes if those exist making the process take forever) 3. I'm trying to reinstall windows on my laptop by creating a bootable USB but when I try to move the files from the disk image mounter, but the file Install.wim is too large. I've done some research and learned about wimsplit so I ran. $ wimsplit install.wim install.swm 1000 --check. and the output was this

How to Fix Microsoft teams Mic Not working issue in

Plug in the pen drive to your PC. Copy any important data out of the pen drive to a place from where you can access it later on. Open Computer/My Computer (or whatever your PC is named) and right click on your pen drive's name. Select Format. Now in the file system drop down menu, change the format from FAT32 to either NTFS or exFAT Alternatively look at moving to things like MDT where the large WIM file is on the network and the image you burn to USB (or load into WDS if you want PXE boot), is a much smaller WinPE image (normally a few hundred mb depending on how many drivers you need to load into it)

I download the game Bravely Second, and i don't know how i can imput in the fat32 sd card, for convert to .cia in God Mode, because file has exatally 4gb!!!! If have anyway to get around it, please tell me. Or someone have this game .cia compacted or trimmed, i would appreciate so much. Thanks The resulting WIM file is 13.6GB in size, a further reduction in size of 1.76GB, and we can see that it contains three apps from the same vendor. To install each application we can modify our powershell installer script to loop through the WIM indexes. # there is an assumption that only 1 wim file is in this folder

Create a USB Drive for Windows Server 2019 Installation

Fix install.wim file too large for Destination File system ..

The file install.wim is too large for the destination ..

The final problem is that the install.wim file is too big to copy across to the FAT32-formatted USB stick[ref]I've also tried using exFAT, which doesn't have the 4 GB file limit, but then the USB drive isn't bootable in my machine[/ref] (you can try, but will be met with an error). On Windows, Microsoft's official solution is to split the file. If only the install.esd file is available in the sources directory, you can convert it to the install.wim. Let's create an answer unattended file for Windows 10 1909 (Build 18353.592). Run the Windows System Image Manager with administrator privileges (C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\WSIM. The file install.wim is too large for the destination file system: 11/16/2019 Powershell command to generate a self-signed SSL certificate: 11/14/2019 dotnet core 3.0 PublishSingleFile can't find appsettings.json: Tags. Coverlet csharp. Bridge file system ISO9660 and UDF: Shift F10 command console does dir a 4.4gb install.wim file. Windows setup.exe does not read install.wim. Conclusion: Windows setup.exe does prefer ISO9660 before UDF, but dosn't read a big ISO9660 file. Finally: I've no solution to a multiboot Windows XP with a big Windows Vista/7 install.wim file Re: File is too large to copy. Post. by randomizer » Sun Feb 06, 2011 11:52 am. pompom wrote: The command is dd, the if stands for input file, the of is the output file, conv is the conversion flag, here we are telling the druid not to truncate anything, otherwise we are in big trouble. You could be in big trouble in many ways using dd

Install.wim too large for Destination File System 1000% ..

I then moved all the ISO files to the FAT32 USB, but with the new install.wim files. This time, when I booted from the USB, I get the Windows boot media, but it obviously cannot find install.wim . So I go to the command prompt and follow the guide and type out the diskpart commands it says (I followed MBR) Hi Legolash2o. Windows Command prompt does have command for setting variables, but I am afraid that it doesn't mean less work in your case. I think you could use a batch file to get that goal, I am not a expert about script but

Windows 10 ISO contains WIM file that is big for FAT32

Method 1: Step 1: Backup all important files from your USB drive as all data on the drive will be erased while converting the file system. Step 2: Open up Computer (This PC in Windows 8.1), right-click on the USB drive that you wish to convert to NTFS, and then click Properties. Step 3: In the Properties dialog box, expand the File system drop. Trên đây là những hướng dẫn đơn giản có thể giúp người dùng khắc phục được lỗi the file is too large for the destination khi copy, lưu trữ file dữ liệu có dung lượng quá 4GB. Hy vọng với thủ thuật nhỏ này đã giúp các bạn khắc phục lỗi thành công

Fix The File is too Large for the Destination File System. Step 1: Insert USB Flash Drive or External SD card in PC and then assign a new drive letter to it. Step 2: Open My Computer and locate the drive then select the drive and then format your drive to NTFS format. ->Format your Drive by right click on the drive In the Import Operating System Wizard, on the OS Type page. select Full set of source files and click Next. On the Source page, in the Source directory text box, type D:\ and click Next. On the Destination page, in the Destination directory name text box, type WS2019, click Next twice, and then click Finish The install.wim file is now too large to copy to the FAT32 partition of the USB. *Note it is possible to create a USB formatted as NTFS and have it boot, however this does not work on all computers. The only universal file system to use to ensure the USB will boot is FAT32

Plus there's a whole lot more you can do in WinPE than just installing Windows. WinPE [User-friendly PE Builders] +++ Use (WinPE) Boot.wim in place of (Recovery) Winre.wim +++ [SOLUTIONS] Installing Windows on UEFI System with install.wim over 4 GB +++ Win10 Setup Disk [Works with UEFI with Secure Boot / BIOS / Install.wim over 4 GB] First, why this happens: the reason is that you copy a file that is more than 4 GB in size (or the copied folder contains such files) on a USB flash drive, disk or other drive in the FAT32 file system, and this file system has the limit on the size of one file, hence the message that the file is too large wabbajack installation failed. 8. Check if any Windows Update is pending on your computer. The general procedure is download the Modlist which comes as a .wabbajack file, opening Wabbajack, clicking on the Install From Disk button, configuring Install and Download Location and hitting start. share. The Morrowind Code Patch generates a new. Ever got a message like that? When copying or transfer a file, the system says file too large for USB or the file is too large for destination file system. But the available space is more than enough. Why this can't be transferred? Well, the problem is not from the USB drive, instead, it's caused by the type of system on the drive As of April 2020, Microsoft made the install.wim file too large to fit on a normal USB formatted to FAT32. For that reason, you will need to use this workaround method. First, move all the files from the ISO to the USB except for the .wim file

Everything went fine until it got to copying ISO files... D:/sources/install.wim (3.6GB). Now it's just been sitting there for an hour. I've selected file system as Large FAT32 (default) instead of standard FAT32 not sure if that makes any difference. I'm using the official MS Windows 10 ISO downloaded from their website They install just fine if I manually import the archive, though. video_call ADD A VIDEO. Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. Posts : 13,921. Mark all (0) as read. The file install.wim is too large for the destination file system I thought I had it finally figured out. I created a custom Windows 10 installation, captured the image (install.wim) used MDT to create an installation, only to not be able to copy the 16GB file over because the USB is in FAT32 format and NTFS is not bootable Now you should be able to copy your large files by either splitting them or converting the hard drive to NTFS! If you have a USB drive, read my post on how to format a USB drive in NTFS format.. If you can't split the file for whatever reason and you don't want to convert the file system on the drive to NTFS, the only other possible solution is to try and compress the file This paper defines the internal format of a Windows Imaging (WIM) file format. This information may be used to build .wim file creation or extraction tools, or other WIM-enabled applications. System Requirement

When I format the USB with FAT32, it get the message the install.wim is too big to install. I can do it with NTFS only. The USB drives I have tried were 8 and 16 GB, the install.wim is under 5gb Good question (in the sense of good Quora questions, at least), although it is answered on the Microsoft website: Split a Windows image file (.wim) to span across. The reason being is that current builds of Windows 10 now exceed the FAT32 file size limit and consequently you can't UEFI boot from a flash drive as the install.wim file is too large for the file system. A USB flash drive must be formatted as FAT32 in order to comply with UEFI. NTFS is not supported First, let's explain why you couldn't copy it in the first place: the flash drive's file system. A file system, which is a separate thing from an operating system and other mechanisms on a computer, is an organizational scheme used to control how data is stored and retrieved on a a given storage medium (like a hard disk, a DVD disc, or a removable flash drive)

Fixes for 'File Is Too Large for Destination File System

  1. Solved File Is Too Large For The Destination File System Hd Narration Youtube . For more information and source, see on this link : https://www.youtube.com/watch?v.
  2. Based on mentioned above, The file is too large for the destination file system issue results from the limit of maximum size of the destination drive file system. Hence, you can check your drive file system. Most of time, it may be either FAT or FAT32. Then, what you can do is to convert file system to NTFS. Here are 4 ways to get it
  3. This file system is also compatible with Mac. Windows 7 and Mac OS 10.6.6 and higher are compatible with exFAT out of the box. Older operating systems may need a patch installed for exFAT compatibility. NOTE: exFAT file system is NOT compatible with some host devices such as TV, game systems, older operating systems, car stereos etc

4 Methods to Fix File Is Too Large for the Destination

3.2GB file Too large for FAT32? | MacRumors Forums. High Sierra Destroys FAT32. as a reference. The incorrect integer size was used. It works properly in older versions of macOS. 2**32 -1 is 4294967295 bytes. Both these files should fit on a FAT/MBR file system/device From the File menu, click Select Windows Image. Select the correct Install.wim file. From the File menu, click Open Answer File, and then select a sample file from the folder C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit\Deployment Tools\Samples\Unattend on the technician computer The final problem is that the install.wim file is too big to copy across to the FAT32-formatted USB stick (you can try, but will be met with an error). On Windows, Microsoft's official solution is to split the file using a special tool designed for these .wim files The install.wim file in that ISO is 4.09GB since it contains home AND pro versions of Windows 10. Thank you for this thread - I was banging my head against the wall trying to solve this one. My issue was I was using the 1709, 1803, and 1809 versions downloaded from VLSC which contain far more versions than just home & pro and the install.wim. The WIM file is actually 3.52GB, not as big as I thought. The office2k10 file is called Office2010.exe, and I put it in a folder called addons in the root of the ISO. I also noticed I could not put the VM Windows XP mode either, it is around 490MB in size

@kpal: To put the install.wim back to the Windows ISO file, you have to: 1. Extract the Windows ISO image file. 2. Delete the existing install.wim (or install.esd) from the sources folder at the extracted ISO folder. 3. Copy the extracted install.wim to sources folder (at the extracted ISO folder) 4 This was the first thing we tried, before discovering DISM, but the original Install.wim file is 4.4 GB and thus too big to be written to a FAT32 file system. We couldn't use an NTFS format USB. When I try to import operating system, system tell me can not find install.wim in windows sources. I did some research found out that current windows 10 home/pro installation media comes with install.esd instead install.wim. Is there anyone know to to extract install.wim from install.esd. I have looked at few ways online, none of them working Probably your disk containing P:\ has too many partitions (more than 8). I should be able to fix this. However applying from drive X:\install.wim to X:\ works, just a warning. Properly because the log files from system hive are pointer files, so loading the hive fails. Yes, you should add those files to [PrepopulateList]. Those files shouldn't. Under File system click the dropdown box and change the file system to NTFS. Volume label will be the name of the drive as you might have already noticed. You can change the name or leave this setting alone. Quick Format should be checked, and often is by default. Click Start

To try ExFat: Copy ALL the contents from your MicroSD to your PC. Format the MicroSD to ExFat Put all your stuff back into the MicroSD. To Fix the Issue without ExFat, use NSP Splitter you need to install PyThon 3 and add it as an the Environment Variable, so you can call it from CMD, if not, then you need to open Python 3 Terminal, point to the NSP and execute the command Plug the USB device in a Windows computer.; Open File Explorer and click on This PC option from the left pane. Note: Open My Computer for Windows 7 and older operating systems Right-clicking on the This PC icon in the left pane; Right-click on the name of the USB Drive and select Format. Formatting the USB drive; Click on the File System dropdown and. And this post [Solved] - The File Is Too Large for the Destination File System tells more on this report. Why There Is Not Enough Free Space on the Drive This may seem confusing, but if you try copying more other files to this external hard drive, you may find something important: you can copy the smaller files to this external drive just fine

D:\imaging\install.swm is the destination name and the location for the split .wim files. 600 is the maximum size in MB for each of the split .wim files to be created. In this example, the /split option creates an install.swm file, an install2.swm file, an install3.swm file, and so on, in the D:\Imaging directory. noteNote You cannot modify a. This can be used to turn the oversized install.wim into a couple of smaller files. However, there are a few advanced steps more you have to deal with during installation then. Check out How to create a Windows 10 bootable USB on a Mac for PC without Bootcamp, when install.wim is too large on StackExchange to learn more Prestaged Media deployments: Prestaged media deployments let you deploy an operating system to a computer that is not fully provisioned.The prestaged media is a Windows Imaging Format (WIM) file that can be installed on a bare-metal computer by the manufacturer or at an enterprise staging center that is not connected to the Configuration Manager environment Since FAT32 can only handle files up to 4GB (it truncates anything larger), the fluffy install.wim that exceeds this limit gets corrupted and results in a USB that you can boot from, but fails partway through attempting to install Windows, luckily it usually stops before it deletes the partitions that currently exist on the destination hard. To make a portable WIM imager with no kace support. 1: create a bootable kace usb drive with the K2000 boot environment. (use a usb device large enough to also hold the wim's) 2: take the boot.wim file from the .\files\sources directory and put that in a directory that also has the file imagex on your computer. 3: create a temp dir below that dir

Create Bootable USB For Windows 10 Install

During the installation of Windows, all files are extracted from the install.wim/esd image to the system drive of the computer. If you compare the size of the wim and esd file, you can notice that the file size with the esd extension is smaller, because it is compressed more strongly (a new type of compression is used - Recovery) New. 08 Nov 2012 #5. Yes that will create the iso from the wim file install.wim it will take all the files needed to create the iso for you. Then you just need to burn it onto a disc. Or what you could do is download UltraIso . Add the files you want and save it as an iso. I do that as well The WIM format supports split files; when installing Windows, the Windows installer recognizes the split files as treats them as a single large file, as long as all the split files are in the same folder. If you look in the sources folder on the new ISO, you will see multiple install.swm files with a number appended on the end imagex.exe /apply install.wim 1 d:\ (d is the assumed drive you are using for your target system and the .WIM is the name of your .WIM file --I've just taken as an example the standard INSTALL.WIM' file that exists on the install media for W8 Consumer Preview) Step 1. Connect the destination external hard drive or flash drive to the computer with an installed copy of WinToUSB, then run WinToUSB. Step 2. Click the button, then click the button and select the Windows installation ISO/WIM/ESD/SWM or VHD/VHDX file from the open dialog box. Step 3. WinToUSB scans for and lists installable operating systems

Windows 10 installer files too big for USB flash drive

Limitations of FAT32 file system. FAT32 is flexible and robust file system providing enhancements over previous FAT file system, and yet it has a couple of limitations. This part explains limitations existing in FAT32 file system with Windows operating system, which can account for the volume too big issue PS Scripting - USB install media: Add or Remove Windows Features, 0 Comments. This sample PowerShell script will show how to use menus, and how to make selections using an Out-GridView table. In addition, we will mount a WIM image for offline servicing, and save changes made to it

Load Windows 10 on Gateway Laptop Currently Running Vista

The PCs came with Windows 10 Pro 64 pre-installed. I attempted to import Windows 10 Pro 64bit from Dell media DVD but it includes two Split WIM files (install.swm and install2.swm) instead of install.wim. It turns out that .swm files are not supported in MDT 2013. Thus, I set out to merge install.swm and install2.swm into install.wim Just to avoid any confusion, if the install.wim is too big, just copy everything else (which should be done by the above script) and then run the dism command at the bottom of that article to create the 2 SWM files. Copy the SWM files into the location the install.wim would have been - there's nothing more to do than this The WIM is read-only (file permissions, header flag, or split WIM). And the successful result look like this: install.wim original size: 4463411 KiB Using LZMS compression with 8 threads Archiving file data: 9 GiB of 9 GiB (100%) done install.wim optimized size: 3311533 KiB Space saved: 1151878 Ki The problem is because your destination disk (the disk to which you want to copy the file) is formatted with FAT32 (which has a file size limit of about 4GB. Mount another big disk that has space for a single file that is the full size of the entire broken disk: If the file-system is too damaged, you may not be able to mount without. First create a new folder called c:\wim. copy your install.wim to that folder. This command only works within windows 8 use this command to split your install.wim then copy all files to your source location on your iso or usb. remember to delete the original install.wim fom your installation source, and then run windows 8 setup

1. Boot to the bootable WinPE external USB hard drive. You will have to choose to boot to USB storage as the boot option during the boot process. 2. Change the drive to the one that holds ImageX executable file. 3. Run it with /capture switch to capture the image. imagex /capture c: imagename.wim imange name It would also work for any Windows 7 or 8- 8.1 Operating Systems. >First create a new folder called wim on the C drive. >Extract everything from the .Iso file to a folder anywhere on your computer such as Desktop. >Copy the install.wim to the wim folder you made on c drive. c:\wim. >Use this command to split your install.wim or with cat in linux. The destination file will of course have to exist on a filesystem type that can handle a file of that size. $ split -b 3999999999 largefile part_. The default suffix is alpha chars and 2 in length for split, so: $ cat part_aa part_ab part_ac > allthe parts. Or just use a different file system

[Solved] - The File Is Too Large for the Destination File

1 - Right Click the Operating System Image and choose Schedule Updates. 2 - Filter the result by 1809, select the two KBs and choose Next. 3 - Choose Next to begin the Offline Servicing as soon as possible. 4 - Review Settings and choose Next. You can monitor the progress of the WIM update The problem is, when the FAT32 file system was designed (that was back in the days of Windows 95), no one anticipated that we would have such large files in use today. Or, maybe the designers hoped that by the time such large files become common, the use of the FAT32 system would be replaced by the more modern systems - on the FAT32 partition create a sources folder and copy the \sources\boot.wim file in it from dvd - copy ALL the files and folders from the DVD to the NTFS partition this key should be able to boot , the windows setup should appear and you should be able to install windows succesfully, at least it worked in my cas There's a long history of filename lengths being a problem for operating systems like Windows. There was a time when you couldn't have filenames longer than 8 characters plus a 3-character file extension. The best you could do was something like myresume.doc. This was a restriction in place by the design of the file system The WIM-file is just over 4 GB, so I tried your command for splitting the image with DISM. The splitting went well, and created 4GB + 40 MB WIM-files, but during installation of Server 2016 Datacenter, the setup asked for disk 2. Since the ISO-file is more than 4,7 GB, I also cannot burn it to a DVD+R. Any suggestions are greatly appreciated

Download Windows 10 Disc Image (ISO File) When burning a DVD from an ISO file, if you are told the disc image file is too large you will need to use Dual Layer (DL) DVD Media. To check this on your PC, go to PC info in PC settings or System in Control Panel, and look for System type. System requirements Step 2: Insert your USB storage drive into your Mac. The ISO file is only about 5 gigabytes, but I recommend you use a USB drive with at least 16 gigabytes of space just in case Windows needs more space during the installation process. I bought a 32 gigabyte USB drive at Walmart for only $3, so this shouldn't be very expensive When you have decided where you want to store the images and are ready to create a custom refresh image we need to open an elevated command prompt in Windows 8. To open an elevated command prompt. The tutorial is great, thank you, but I had an issue: One file's size (/sources/install.wim, in the 64 bit version) is greater than 4 GB, so will not fit in your MS-DOS formatted partition Copy the original fonts files from the C:\Distr\wim\Windows\Fonts to the C:\Windows\Fonts directory with the replacement of files on the target directory:. Copy-Item -path C:\Distr\wim\Windows\Fonts -Destination C:\Windows -recurse -container -force. The font files will be replaced with the original ones Use install.wim To Generate Some Categories To Answer. 1. Open Windows System Image Manager as an administrator. 2. Right-click in the lower-left corner. 3. Choose Select Windows Image 4. Navigate to your Desktop. 5. Open install.wim 6. Choose Yes on the dialog that appears 7. Right-click in the top-right section. 8. Choose New Answer File 9